#50 - 1/2" Single     #75 - 3/4" Single

#200 Single            #400 Single   

#2000 w/o case

#4100 with Case

#6100 with case

#1751 Gasket Kit

#202 Gaskets

#6751 Gasket Kit

Jet Swets are the original, professional tool of choice for soldering with the water in the line. As we know, you

cannot solder a pipe with water still in it, and it normally takes hours to adequately drain the system to do any repair.

      The major money making benefits of owning a Jet Swet are:

• Doing the pipe repair as soon as you get to the job. No waiting for water to completely drain.

• Having immediate control over draining or siphoning water.

• Keep costs down so you can secure more "contract" work.

• Look more professional, no more bread!

• Never lose money on "contract" work due to uncontrollable draining water.

• Service Hotels, Motels, Apartment and Commercial Buildings.

      The Jet Swet works on many styles of pipe, and is ideal for use with:

• Schedule 40 PVC (recommended)

• Schedule 80 PVC

• Steel Pipe: Galvanized or Black

• Copper Pipe type L or Type M

      Specifications:

• Jet Swet Single Tools - Rated at 55-60 psi based on size

• Jet Swet Flo-Thru Tools - Rated at 60 psi.

• Jet Swets are made from the highest quality steel and aircraft aluminum

• The Jet Swet gasket is a special EPDM/Silicon composite, made to withstand the intense heat of soldering and braising.

• There is a 1 year warranty from manufacturers defect on the entire tool except for the disposable, replacement gaskets.

The problem that most plumber's face with draining the system is one of a lack of speed and/or professionalism. Many times, in the case of maintenance personnel, the building's water cannot be shut down more than a couple of minutes. In the case of plumbers, repeat customers are more likely to be retained by doing a job more quickly and efficiently, instead of charging additional hours to just watch water drain.

New Jet Swet Flo-Thru units now available...

in 1-1/2", 2", 2-1/2", 3" & 4" sizes

Jet Swet Flo-Thru units help eliminate water build-up on larger lines

Comes with 3/4" hose outlet with 1/2" hole in Flo-Thru

Flo-Thru™ Jet Swets™ are even more advanced then the previous single tool models. They are built with a ½" cavity down the center of the tool to allow water or air to drain from the system through a 3/4" hose outlet while the repair is in progress!

They are made from the same "professional grade" materials as the Jet Swets™ and have a hose connection attached to the end of the hollow handle. This connection allows you to attach a garden hose to the end of the tool which directs the draining water to a floor sink or gutter while you continue the repair.

Flo-Thru™ Jet Swets™ are designed for 1-1/2", 2", 2½", 3" and 4" pipe systems and can withhold a maximum of 65 lbs. of head pressure.

A major benefit of the Jet Swet Flo-Thru line is that not only can water be drained, but in when working on swimming pools or like projects, an air supply at a maximum of 65 lbs. can be added through the Flo-Thru™ Jet Swet™ into the plumbing system for pressurized testing.

The benefits are that these new Flo-Thru™ Jet Swets™ are cleaner, more controllable, multi functional and effect a quicker repair on any system

Click here: Jet Swet instructions and some uses

We accept Discover, MasterCard, Visa, & American Express

We Ship Via UPS

Call for complete pricing including shipping and CA sales tax