|

Pump 'N' Plug will save you money!
NO MORE
waiting for water to stop dripping
Easily
navigates through elbows and tees
Now you can
finish the job quickly and move on to the next one.
Just Pump 'N' Plug and solder and go.....
Specifications:
Made of strong, flexible silicone rubber
Unit is rated to 4000
F.
Easily navigates elbows and tees
A light
hand-operated pump fills the bulb with air and stops dripping
Available in 1/2"-3/4", 1"-1-1/4", 1-1/2"-2" sizes
|
Pump 'N' Plug
Installation Guide
|
|
1. Shut off main water valve.
2. Insert proper bulb into leaky pipe. |
3. Connect tube to pump. |
|
 |
 |
 |
|
4. Pump until water drip stops. |
5. Bend rubber tube to prevent air escape
and disconnect pump. |
6. Insert plastic plug into tube. |
|
 |
 |
 |
|
7. Slide an elbow into place. |
8. Slide a piece of pipe into place. |
9. Slide the valve into place. |
|
 |
 |
 |
|
10. Solder all parts. |
11. Remove the plastic plug and gently pull out the
bulb. |
|
 |
Call 1-877-747-3626
To order your today! |
Distributed by:
PipeMan Products, Inc. |
|
|
|
|
|