The TM1-Pro 1.00"-3.00" Kit Shown Above

Capacity: from 3/4" to 6" for Hot Tapping Steel, Cast Iron, Ductile, and Plastic Pipe

The TapMaster TM-1 Pro Series Hot Tap Machine.

Specifications:

Temperature Rating: 250 degrees Fahrenheit with standard seals

Hydrotest Pressure: 350 psig., cold, non-shock

Boring Bar Stroke:

Short Boring Bar = 13.75"

Long Boring Bar = 48.00"

Feed Screw Stroke:

3" to 8.50" = Positional at any locations, covering approximately 15" of cutter feed

Power Motor:

Standard Electric Motor = 300 free rpm; 120 v 60HZ

TM-1 Pro 1" - 3" Base System includes:

TM-1 Pro Series Hot Tap System

Standard Feed Screw, Guide Rail Plate & 3 Bar Assembly

Motor Guide Plate

Milwaukee 1675 - 1/2" Hole Hawg Electric Drive Motor w/ key

1.00", 1-1/2", 2.00", 2-1/2 and 3.00" Sub-adaptors

1.00", 1-1/2", 2.00", 2-1/2 and 3.00" HSS Bi-Metal Cutters

 Sub-adapter Packing Housing 5/8 I.D. Brass 3 O-ring packer

18" L - 5/8" OD Threaded Boring Bar for 3/4"-1-1/4" taps

18" L - 5/8" OD Threaded Boring Bar for 1.50"-2.00" Taps

18" L. - 5/8" OD Boring Bar with 2-Bolt head for 2" & 3" Taps

 24" L. - 5/8" OD Boring Bar with 2-Bolt head for 2" & 3" Taps

TM1-Pro Heavy Duty Carry Case and Operations Manual

Set of Misc Extra O-rings & screws, Locktite, & 24" OD Tape

1/4" Bleed Valve, Large and Small Allen wrenches

1/4" x 4-1/4" and 3/8" x 4-1/4" Pilot Drills w/ Dual Retention Wires